500-1499 Poles
$10.00
≥1500 Poles
$5.00
Features
Rated voltage | Noninductive Load (A) | Inductive Load (A) | ||||||
Resistance Load | Lamp Load | Inductive Load | Motor Load | |||||
NC | NO | NC | NO | NC | NO | NC | NO | |
AC 125V AC 250V AC 480V DC 125V DC 250V | 15 15 10
| 3.0 2.5 1.5 | 1.50 1.24 0.75 | 15 15 6 | 5 3 1.5 | 2.50 1.50 0.75 | ||
0.50 0.25 | 0.50 0.25
| 0.05 0.03 | 0.05 0.03 |
Surge current | NC | 30A (under) |
NO | 15A (under) |
NOTES:
1. The above figures are for standard current.
2. Inductive loads have a power factor of 0.4 min.(AC) and a time constant of 7 ms max.(DC).
3. Lamp load has an inrush current of 10 times the steady sate current.
4. Motor load has an inrush current of 6 times the steady sate current.
Characteristics
Degree of protection | IP65*1 | |
Life | Mechanical | Above 10,000,000 times |
Electical | Above 500,000 times, whenAC 250V,15A, resistive load | |
Allowable operating speed | Plunger type: 0.01mm/s~0.5m/s Pendulum rod type: 0.0mm/s~0.5/s | |
Allowale operating frequency | Mchanical | 120 times/minute |
Electical | 20 times/minute | |
Insulation resistance | under 100mΩ min. (500V DC) | |
Rated frequency | 50/60 Hz | |
Contact resistance | under 15mΩ (initial value) | |
Insulation strength | Homopolar terminal | AC 1,000V, 50/60 Hz, 1 minute |
Between the charged metal part and the ground wire | AC 2,000 V, 50/60 Hz, 1 minute | |
Between terminals and live metal parts | AC 2,000 V, 50/60 Hz, 1 minute | |
Shock*3 | Misoperation | under 1,000 m/s2 |
Misoperation | under 1,000m/s2*4, under 50 m/s2*5 | |
Ambient temperature | -10~+80℃ (with no icing) | |
Vibtation | Misoperation | 10~55 Hz, 1.5 mm double-amplitude*3 |
Ambient humidity | General type: 35%~85%RH Closed type: 35%~95%RH | |
Quality | About 260 to 280 g |
Operating Characteristics
Operating Characteristics | Model | TZ-6001 | TZ-6002 | TZ-6003 | TZ-6004 | TZ-6101 | TZ-6102 | TZ-6103 | TZ-6104 | TZ-6143 |
Operating force | OF (Max) | 2.45~3.43 N | 2.45~3.43 N | 2.45~3.43 N | 5.59 (under) | 7.85 N | 4.90 N | 4.90 N | 6.28 N | 6.28 N |
Release force | RF (Min) | 1.12 N | 1.12 N | 1.12 N | 1.67 N | 2.35 N | 0.98 N | 0.98 N | 2.26 N | 2.26 N |
Pre-travel | PT (Max) | 0.4 mm | 0.5 mm | 0.5 mm | 4 mm | 2 mm | 1 mm | 1 mm | 5 mm | 5 mm |
Over-travel | OT (Min) | 5.5 mm | 3.6 mm | 3.6 mm | 6 mm | 5 mm | 3.5 mm | 3.5 mm | 6 mm | 6 mm |
Movement differential | MD (Max) | 0.05 mm | 0.05 mm | 0.05 mm | 0.47 mm | 0.1 mm | 0.12 mm | 0.12 mm | 0.4 mm | 0.4 mm |
Operational position | OP | 38.2±0.8 mm | 49.7±1 mm | 49.7±1 mm | - | 45.8±1 mm | 49.7±0.8 mm | 49.7±0.8 mm | - | - |
Yueqing Sofielec Electrical Co., Ltd.
Yueqing Sofielec Electrical Co., Ltd.ltd is located liushi Wenzhou China. Liushi is famous for the low and high voltage electrical products such as circuit breaker,ac contactor,Timer,relay,switch gear,there is the largest low-voltage electrical appliance market in China and about 15Km far away from Wenzhou Airport and Railway, the transportation is very convenient.
Our Company is specialized in manufacturing modular electrical terminal devices for household,economic and industry area installation. We have wide range of products covers Miniature circuit breaker(MCB), Residual current circuit breaker(RCCB),Residual current circuit breaker with over-current protection(RCBO), Switch-disconnect, Distribution box, High and low voltage switch gear and the accessories in the various type of switch boards,such as SPD,copper terminals,ac contactor,ampmeter etc.
Our company takes the repuation as the large supplier of electro-magnetic type RCCB and RCBO,OEM or ODM projects are available.The most important is above products pass the lab.test and obtained the approvals:CE(Europe),S(SEMKO Sweden),CCC(China),CB,SAA
1,When can I get the price?
We usually quote within 12 hours after we get your inquiry. if you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2,How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
If you just need a blank sample to check the design , we will provide you sample , as long as you afford the express freight.
3,Can you do the design for us?
Yes. We have a professional team having rich experience in mcb/rccb design and manufacturing. Just tell us your ideas and we will help to carry out your ideas. It doesn't matter if you do not have someone to complete files. Send us high resolution images, your Logo and text and tell us how you would like to arrange them, We will send you finished files for confirmation.
4,How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 7-15 days. The samples will be sent to you via express and arrive in 3-5 workdays. You can use your own express account or prepay us if you do not have an account.
5,What is your terms of delivery?
We accept EXW,FOB,CFR,CIF,etc. You can choose the one which is the most convinent or cost effective for you.
Scan the QR code with your phone, or visit the URL