≥600 Pieces
$8.00
- Customized logo (Min. Order: 60 Piece)
- Customized packaging (Min. Order: 60 Piece)
Electronic RCBO Australian hot selling, 2P module AC & A type 32A 30mA SEMKO RCBO
| Pole No. | 1P+N |
| Tripping curve | B, C, D |
| Rated voltage | AC 240V |
| Rated current(A) | 6, 10, 16, 20, 25, 32 A |
| Residual current characteristics | AC |
| Rated frequency | 50/60Hz |
| Rated residual operating current | 0.03, 0.1, 0.3 mA |
| Elector-mechanical endurance | 4000 cycles |
| Connection terminal | Pillar terminal with clamp |
| Terminal connection height | H1=16mm,H2=21mm |
Construction and feature
1.Provides protection against earth fault/leakage current, short-circuit, overload, and function of isolation.
2.Contact position indication.
3.Provides protection against indirect contact by human body.
4.Provides complementary protection against direct contact by human body.
5.Effectively protects electric equipment against insulating failure.
6.Equipped with switched neutral and phase pole.
7.Provides protection against over-voltage.
8.Provides comprehensive protection to household and commercial distributionsystems.
Technical Data
1.S2 Shunt Tripper
2.U2+O2 Over-voltage and under-voltage tripper
3.Connection capacity:Flexible conductor 10mm square; Rigid conductor 16mm square.
4.Installation:On symmetrical DIN rail 35.5mm; Panel mounting.
Overload Current Protection Characteristics
| Test procedure | Type | Test Current | Initial State | Tripping or Non-tripping Time Limit | Expected Result | Remark |
| a | B, C, D | 1.13 In | cold | t≤1 h | no tripping | |
| b | B, C, D | 1.45 In | after test a | t<1 h | tripping | Current in the 5s in the increase of stability |
| c | B, C, D | 2.55 In | cold | 1s< t <60s (In≤32A) 1s< t <120s (32< In ≤63A) | tripping | |
| d | B | 3 In | cold | t≤0.1s | no tripping | Turn on the auxiliary switch to close the current |
| C | 5 In | |||||
| D | 10 In | |||||
| e | B | 5 In | cold | t<0.1s | tripping | Turn on the auxiliary switch to close the current |
| C | 10 In | |||||
| D | 50 In | |||||
| The terinology "cold state" refes to that no load is carried before testing at the reference setting temperature. | ||||||
Residual Current Action Breaking Time
| type | In/A | In/A | Residual Current (I) Is Corresponding To The Following Breaking Time (S) | |||||
| In | 2 In | 5 In | 5A, 10A, 20A, 50A, 100A, 200A, 500A | It | ||||
| general type | any value | any value | 0.3 | 0.15 | 0.04 | 0.04 | 0.04 | Max-Break-time |
| The general type RCBO whose current In is 0.03 mA or less can use 0.25A instead of 5 In. | ||||||||
Yueqing Sofielec Electrical Co., Ltd.
Yueqing Sofielec Electrical Co., Ltd.ltd is located liushi Wenzhou China. Liushi is famous for the low and high voltage electrical products such as circuit breaker,ac contactor,Timer,relay,switch gear,there is the largest low-voltage electrical appliance market in China and about 15Km far away from Wenzhou Airport and Railway, the transportation is very convenient.
Our Company is specialized in manufacturing modular electrical terminal devices for household,economic and industry area installation. We have wide range of products covers Miniature circuit breaker(MCB), Residual current circuit breaker(RCCB),Residual current circuit breaker with over-current protection(RCBO), Switch-disconnect, Distribution box, High and low voltage switch gear and the accessories in the various type of switch boards,such as SPD,copper terminals,ac contactor,ampmeter etc.
Our company takes the repuation as the large supplier of electro-magnetic type RCCB and RCBO,OEM or ODM projects are available.The most important is above products pass the lab.test and obtained the approvals:CE(Europe),S(SEMKO Sweden),CCC(China),CB,SAA
1,When can I get the price?
We usually quote within 12 hours after we get your inquiry. if you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2,How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality.
If you just need a blank sample to check the design , we will provide you sample , as long as you afford the express freight.
3,Can you do the design for us?
Yes. We have a professional team having rich experience in mcb/rccb design and manufacturing. Just tell us your ideas and we will help to carry out your ideas. It doesn't matter if you do not have someone to complete files. Send us high resolution images, your Logo and text and tell us how you would like to arrange them, We will send you finished files for confirmation.
4,How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 7-15 days. The samples will be sent to you via express and arrive in 3-5 workdays. You can use your own express account or prepay us if you do not have an account.
5,What is your terms of delivery?
We accept EXW,FOB,CFR,CIF,etc. You can choose the one which is the most convinent or cost effective for you.
Scan the QR code with your phone, or visit the URL
- Qian Xi Yang Village, Liushi Town, Wenzhou, Zhejiang, China
- +86 15158431127
- [email protected]